Mega Frame is the name of a patented wall and ceiling system. The maximum span as ceiling system is no less than 10 m, while wall systems can be realised up to a height of 15 m. This application does not stop at the ceiling; Mega Frame can also be used as floor. You can realise industrial, flexible and demountable structures. Click on comments for more extensive information.
Table of maximum wall heights
| Type |
Profile MC100.10 mm |
Profile MC150.10 mm |
Profile MC185.10 mm |
Profile MC200.10 mm |
Profile MC200.15 mm |
Profile MC220.15 mm |
| Facing wall, single panel | 6.250 | 7.500 | 8.250 | 8.750 | 10.000 | 11.000* |
| Facing wall, double panel | 6.500 | 8.000 | 9.000 | 9.500 | 11.000* | 12.000* |
| Wall, single panel | 6.500 | 8.000 | 9.000 | 10.000 | 12.000* | 13.000* |
| Wall, double panel | 6.750 | 8.500 | 9.500 | 10.500* | 12.500* | 15.000* |
Table of clear span, ceilings
| Type |
Profile MC100.10 mm |
Profile MC150.10 mm |
Profile MC185.10 mm |
Profile MC200.10 mm |
Profile MC200.15 mm |
Profile MC220.15 mm |
| Single panel | 6.250 | 7.500** | 8.500** | 9.000** | 9.500** | 10.000** |
| Thickness U profile | 1.5 | 1.5 | 2 | 2 | 2 | 2 |
| Double panel | 6000 | 7.250** | 7.750** | 8.000** | 8.500** | 9.000** |
| Thickness U profile | 2 | 2 | 2 | 2 | 2 | 2 |
Comments:
- * in case of wall heights of 10,000 – 13,000 mm, the vertical MC profiles must be attached back-to-back with maximum intervals of 1,200 mm. In case of all heights of 13,000 – 15,000 mm, maintain a maximum interval of 600 mm.
- **The MC profiles are delivered curved.
- The tables are based on closed systems without extra horizontal and/or vertical load.
Downloads:
- Megaframe calculation sheet
- Megaframe
- Megaframe assembly manual